Things to do · Arts and crafts

Forge your own knife on a bladesmithing course

On a one-day course you heat a bar of steel, hammer it into a blade and go home with a knife you made, such as the simple Viking-style knife made at the National Trust's forge at Coleshill. Longer courses go much further; the American Bladesmith Society's two-week introduction ends with blades tested for cutting, edge holding, hardness and flexibility.

Demanding£100 to £500 / $130 to $650A day or a few daysIndoorsWith othersUK and US

Someone who has done it

These are real people who did this, as reported by the outlets named. We opened each one before linking it. None of them is connected with this site.

Christmas present ideas for someone who wants to forge your own knife on a bladesmithing course

Presents that help someone get started, drawn from this page. They are ideas, not recommendations: we have not tested any of the products, so check sizes and details before you buy.

Give the experience

More ways to give it, with reviewers' picks of the kit: Presents for makers and artists.

Kit to give

Some of these are affiliate links: if you buy or book through them we may earn a commission at no extra cost to you. Amazon links are searches, so compare what comes up.

More Christmas gift ideas for people who love doing things Stocking fillers

What it's really like

A knife course is a blacksmithing course aimed at one object. Brinsbury College's one-day chef's knife course takes you through design, forging and finishing, and the American Bladesmith Society's two-week course goes much deeper into forging, heat treating, grinding and tempering.

Most UK courses need no experience. The National Trust's Coleshill day says no prior blacksmithing experience is needed, but it involves upper body movement and is for over-18s only. Brinsbury College's chef's knife day also needs no experience.

US school courses are more technical. The American Bladesmith Society's Intro to Bladesmithing at the New England School of Metalwork runs Monday to Friday, 8am to 5pm, for two weeks, and covers forging, normalising, heat treating, grinding and tempering. Handles and guards are discussed but not part of it.

GOV.UK says it is illegal to carry most knives in public without a good reason, and that a court decides whether a reason is good. Folding pocket knives with a cutting edge no longer than 3 inches that are not lock knives are an exception.

Where to learn and what it costs

WhereFormatCost (as last listed)
National Trust, Coleshill, OxfordshireOne day, 9.30am to 5pm: make a simple Viking-style knife; tools and materials included (12 July run, now past; sold out)£250
Hereford (listed on Craft Courses)One Day Knife Making Course, 7 hours£170
Blyth, Northumberland (listed on Craft Courses)Beginners Knife Forging Day, 1 day£170
Preston (listed on Craft Courses)2 day knife making course£350
New England School of Metalwork, Auburn, MaineABS Intro to Bladesmithing, two weeks, gas forges and one day on coal$1,300 tuition plus $200 materials
Bill Moran School of Bladesmithing, Texarkana College, TexasBasic Forged Chefs Knife, three-day workshop; also a two-week Introduction to BladesmithingNot shown online; call 903-823-3270

North House Folk School in Minnesota asks for long sleeves and trousers, leather closed-toe shoes and cotton or natural-fibre clothing on its forging courses; ear and eye protection are provided.

How to start

  1. Pick the length that suits you: a one-day knife-forging course, a two- or three-day course (often Damascus steel), or a two-week school course in the US.
  2. Check what the fee covers. The National Trust's Coleshill day includes all tools and materials, and aprons and safety glasses are provided.
  3. Read the kit list: natural-fibre clothes, sturdy or safety boots, and no fleeces or flip-flops.

Where to go

We opened these links on 16 November 2026 and found them to be what we say. Dates, places and prices are on the official page, where they stay up to date.

Questions people ask

Do I need blacksmithing experience to go on a knife-making course?

Not for most one-day courses. The National Trust's Coleshill course and Brinsbury College's chef's knife day both say no prior experience is needed.

How long does it take to make a knife on a course?

A simple forged knife can be made in a day. Most Damascus steel courses listed on Craft Courses take two or three days, and the American Bladesmith Society's introduction lasts two weeks.

What should I wear to a knife-making course?

Old natural-fibre clothes that will not melt, and sturdy footwear. Brinsbury College asks for non-flammable clothing, safety boots, safety glasses and an old pair of leather gloves.

Can I carry the knife I made in the UK?

Not in public without a good reason, unless it is a folding pocket knife with a cutting edge no longer than 3 inches that is not a lock knife, according to GOV.UK. A court decides whether a reason is good.

Where this comes from: National Trust, Knife making course (Coleshill); Brinsbury College, Chef knife making; Craft Courses, Bladesmithing courses; New England School of Metalwork, ABS Intro to Bladesmithing; Texarkana College, Bladesmith classes; Texarkana College, Bill Moran School of Bladesmithing events; North House Folk School, Damascus blade with birch bark handle and leather sheath; GOV.UK, Selling, buying and carrying knives and weapons. Opened 16 November 2026.

Read next

More like this

All arts, crafts and music →

← All activities

The Second Start — our free email list

Our email is starting soon: one real story and one thing to try. Join now to get the first one. Free: the 7-Day Restart Plan (PDF) when you join.

Make this site yours

Three quick questions and we'll show you what fits: no beginner tips if you're already fit, no marathons if you're just starting. It stays in this browser, and you can change it any time.

How active are you at the moment?
Your age (optional)
What interests you? (pick any)