Things to do · Arts and crafts
Make a Windsor chair on a week-long course
A friend has invited you to do this with them.
In about six or seven days you make every part of a Windsor chair yourself, from the legs and spindles to the carved seat and the steam-bent back, and take the chair home. Beginners are welcome on several courses, including Greenwood Days at Staunton Harold, on the Leicestershire/Derbyshire border, which is open to all levels.
DemandingOver £500 / $650A day or a few daysIndoors or outWith othersUK and US
Someone who has done it
These are real people who did this, as reported by the outlets named. We opened each one before linking it. None of them is connected with this site.
Christmas present ideas for someone who wants to make a Windsor chair on a week-long course
Presents that help someone get started, drawn from this page. They are ideas, not recommendations: we have not tested any of the products, so check sizes and details before you buy.
Kit to give
- DrawknifeAmazon shaping spindles and seats at home after the course
- SpokeshaveAmazon smoothing curved parts such as spindles and arms
- Ear defendersAmazon hearing protection in a busy workshop
Some of these are affiliate links: if you buy or book through them we may earn a commission at no extra cost to you. Amazon links are searches, so compare what comes up.
More Christmas gift ideas for people who love doing things Stocking fillers
What it's really like
A Windsor chair course is a full project, not a taster. On West Dean College's course, taught by Jason Mosseri of Hopesprings Chairs, you make all the parts of an oak and ash side chair, steam-bend the crest and stretchers and carve the seat from a seasoned ash board. West Dean says the work is demanding mentally and physically and needs a good level of fitness.
It uses some of the same tools as green woodworking, such as the drawknife and spokeshave, but where a pole-lathe taster sends you home with a small turned item, a Windsor course ends with a chair you can sit on. Tyntesfield's course in Somerset is held outdoors, so you dress for the weather.
Beginners at Greenwood Days can choose a single bow or a continuous arm Windsor. More experienced makers can make a Welsh Windsor or a child's chair.
Where to learn and what it costs
| Where | Format | Cost (as last listed) |
|---|---|---|
| National Trust, Tyntesfield, near Bristol | Six days, outdoors; make a comb-back Windsor chair | £395 |
| Greenwood Days, Staunton Harold (Leicestershire/Derbyshire border) | Seven consecutive days of 7 hours; 1 to 8 students; tools and materials included | £750 |
| West Dean College, West Sussex | A week; oak and ash Windsor side chair; materials, many tools and lunch included | Not shown on the course page |
| Port Townsend School of Woodworking, Washington | Six days, Monday to Saturday (April 2026 run, now past); class of 10; tools provided | $1,170 tuition plus $350 materials |
| Marc Adams School of Woodworking | Six days (May 2026 run, now past); sack-back armchair in the Philadelphia style | $1,260 tuition plus $175 materials |
Port Townsend suggests bringing safety gear you like, such as a dust mask, goggles and ear defenders. West Dean says stout covered footwear is essential in the workshop.
How to start
- Choose a course that says it suits beginners; the Port Townsend School of Woodworking's Windsor course is open to all, while West Dean says some woodworking experience helps.
- Check the total cost, as US courses list tuition and a separate materials fee.
- Book the whole week off; courses run for six or seven consecutive days and are physically and mentally demanding.
Where to go
- Greenwood Days: seven-day Windsor chair making (Staunton Harold, on ClassBento) UK
- National Trust, Tyntesfield: Make your own Windsor Chair (near Bristol) UK
- Port Townsend School of Woodworking: Chairmaking, Building a Windsor (Washington) US
- Marc Adams School of Woodworking: sack-back Windsor chair with David Wright US
We opened these links on 16 November 2026 and found them to be what we say. Dates, places and prices are on the official page, where they stay up to date.
Plan this
Two ways to plan it.
Plan it yourself Free
The links you need to book it, get there, find somewhere to stay and eat, and see what else there is to do nearby. They are searches for you to run; nothing is saved.
Show the links
Plan it with dates
Pick a day, or a month, and we will set out how to get ready, step by step, with a date and a reason for each. Projects run over months and stall without a rhythm, so the plan sets milestones you can see.
Questions people ask
How long does it take to make a Windsor chair on a course?
About a week. The courses we found run for six or seven days.
Can a beginner make a Windsor chair?
Yes, on several courses. Greenwood Days and Port Townsend are open to all levels, and Tyntesfield says the course is within the capabilities of most. West Dean says some woodworking experience is helpful.
How much does a Windsor chair making course cost?
From £395 to £750 in the UK and about $1,435 to $1,520 in the US once materials are added, as last listed for 2026 runs that have now finished. Check what is included.
Do I need my own tools for a Windsor chair course?
No. Greenwood Days and Port Townsend provide the tools and West Dean many of them, though you can bring favourites such as a drawknife or spokeshave.
Where this comes from: ClassBento, 7 Day Windsor Chair Making Course (Greenwood Days); National Trust, Make your own Windsor Chair (Tyntesfield); West Dean College, Make a Windsor chair; Port Townsend School of Woodworking, Chairmaking, Building a Windsor 2026; Marc Adams School of Woodworking, Building an iconic American sack-back Windsor chair. Opened 16 November 2026.
Read next
Two radio mixes and a festival slot: Melanie Harris's first year as a DJ
How Melanie Harris, a lifelong clubber from Walsall, learned to DJ as Mom-A-Vibez, had mixes played on UK radio and was booked for Birmingham's Mostly Jazz, Funk and Soul Festival; and how to learn to mix yourself, from a first course to a first set.
From the Latest Music Bar to the hospital lab: Angi Mariani's first in biomedical science
How a Brighton music-bar owner and TV presenter took a part-time science degree alongside a hospital lab job, what national figures say about who keeps learning, and how to find a course or a way into laboratory work.

