Things to do · Arts and crafts
Learn wood engraving
A friend has invited you to do this with them.
Wood engraving cuts a picture into the polished end grain of a small block, traditionally boxwood, with finely pointed tools, so every cut prints white and the uncut surface prints black. The Society of Wood Engravers calls it drawing with light, and Country Life notes that the work is often done on kitchen tables.
Gentle£100 to £500 / $130 to $650A few weeksIndoorsAlone or with othersUK and US
Someone who has done it
These are real people who did this, as reported by the outlets named. We opened each one before linking it. None of them is connected with this site.
Christmas present ideas for someone who wants to learn wood engraving
Presents that help someone get started, drawn from this page. They are ideas, not recommendations: we have not tested any of the products, so check sizes and details before you buy.
Kit to give
- End-grain engraving blocksAmazon the hard, smooth surface you cut the picture into
- Wood engraving toolsAmazon fine gravers for cutting lines and clearing areas
- Relief printing ink and rollerAmazon inks the block for proofing and printing
Some of these are affiliate links: if you buy or book through them we may earn a commission at no extra cost to you. Amazon links are searches, so compare what comes up.
More Christmas gift ideas for people who love doing things Stocking fillers
How it differs from woodcut and linocut
A woodcut is cut on side-grain wood, a plank, with U- or V-shaped gouges or knives, and a linocut is carved into linoleum. A wood engraving is made on a block of end-grain wood, traditionally a very slow-growing wood such as boxwood, using fine steel tools, Bankside Gallery explains. The grain does not show in the print, and the technique is credited to Thomas Bewick in Newcastle in 1768.
Because box trees do not grow large, blocks are small, and Country Life notes that engravers join sections together to work bigger. The Society of Wood Engravers says many engravers now use lemonwood, maple or synthetic blocks instead of boxwood. Work is slow; one engraver told Country Life you may be working on the same piece for 300 hours.
The tools have odd names, such as the spitsticker and the scorper. The inked block is printed on a press, though Country Life quotes an engraver who burnishes prints with the back of a spoon.
Ways in and what they cost
| Where | Format | Cost (as last listed) |
|---|---|---|
| West Dean College, West Sussex | Residential or non-residential short course; lemonwood block, practice block, shared tools and paper supplied; no experience needed | Not shown on the course page; check when booking |
| Adult course, Station Plaza, Hastings (adult.escg.ac.uk) | Thursday evenings, 6pm to 8.30pm, for a term; practice block, ink, paper and tools supplied, extra blocks bought in class | £130 a term (2025 to 2026 terms) |
| Pyramid Atlantic Art Center, Hyattsville, Maryland | Two days, 27 to 28 June 2026; bring two or three gravers; covers sharpening and printing | $311 for non-members, including a $32 materials fee |
| John C. Campbell Folk School, Brasstown, North Carolina | Week-long class, 16 to 22 August; all levels; tools sized to your hands included | $870 tuition plus a $35 materials fee |
Pyramid Atlantic asks beginners who buy only two gravers to get an elliptic or square graver plus a round one.
How to start
- Book a short beginners' course where blocks and tools are supplied; West Dean College advises against buying tools before you go.
- Bring a small black and white design; West Dean's beginners' block is 3 x 4 inches (75 x 100 mm).
- Read Simon Brett's Wood Engraving, How to Do It, which the Society of Wood Engravers recommends, and visit its annual exhibition to see what the medium can do.
Where to go
- Society of Wood Engravers: what wood engraving is, members and exhibitions
- West Dean College: Wood engraving with Cathryn Kuhfeld UK
- Pyramid Atlantic Art Center: Beginning Wood Engraving (Maryland) US
- John C. Campbell Folk School: Wood Engraving, Historic Letterpress Illustration (North Carolina) US
We opened these links on 16 November 2026 and found them to be what we say. Dates, places and prices are on the official page, where they stay up to date.
Plan this
Two ways to plan it.
Plan it yourself Free
The links you need to book it, get there, find somewhere to stay and eat, and see what else there is to do nearby. They are searches for you to run; nothing is saved.
Show the links
Plan it with dates
Pick a day, or a month, and we will set out how to get ready, step by step, with a date and a reason for each. Courses and classes have start dates and can fill up, so the plan begins with finding and booking one. Kit comes after the first session, once you know what you need.
Questions people ask
What is the difference between wood engraving and woodcut?
A woodcut is cut along the plank with gouges and knives. A wood engraving is cut into the end grain of a hard wood such as boxwood with fine steel tools, which is why engravings tend to be small and closely worked.
What wood is used for wood engraving?
Boxwood is the traditional choice, but the Society of Wood Engravers says many engravers use lemonwood, maple or synthetic blocks.
Do I need a printing press for wood engraving?
Not to start. Courses print on presses, but Country Life quotes an engraver who burnishes prints by hand with the back of a spoon.
Do I need drawing skills to learn wood engraving?
West Dean College says no previous experience of wood engraving is needed, though some drawing experience helps.
Where this comes from: Society of Wood Engravers, wood engraving; Bankside Gallery, What is Wood Engraving? ...and other relief printmaking techniques explained; Country Life, Cutting it fine: the ancient art of wood engraving; West Dean College, Wood engraving with Cathryn Kuhfeld; West Dean College, Wood engraving, developing your skills with Robin Mackenzie; ESCG adult courses, Wood Engraving; Pyramid Atlantic Art Center, Beginning Wood Engraving; Wikipedia, Pyramid Atlantic Art Center; John C. Campbell Folk School, Wood Engraving, Historic Letterpress Illustration; Wikipedia, John C. Campbell Folk School. Opened 16 November 2026.
Read next
Two radio mixes and a festival slot: Melanie Harris's first year as a DJ
How Melanie Harris, a lifelong clubber from Walsall, learned to DJ as Mom-A-Vibez, had mixes played on UK radio and was booked for Birmingham's Mostly Jazz, Funk and Soul Festival; and how to learn to mix yourself, from a first course to a first set.
From the Latest Music Bar to the hospital lab: Angi Mariani's first in biomedical science
How a Brighton music-bar owner and TV presenter took a part-time science degree alongside a hospital lab job, what national figures say about who keeps learning, and how to find a course or a way into laboratory work.
More like this
Gentle
Try Japanese woodblock printing
Gentle
Make a linocut print
Gentle
Try letterpress printing
Moderate
Make your first etching
Gentle
Learn glass engraving
Moderate
Cut letters in stone by hand

