Things to do · Arts and crafts

Try bronze casting

In lost-wax casting you model a sculpture in wax, coat it in a mould, melt the wax out and pour molten bronze into the space it leaves, a method the Getty says has been used since ancient times. Beginners' courses take you through every stage, from modelling to the pour to colouring the finished metal.

ModerateOver £500 / $650A day or a few daysIndoorsWith othersUK and US

Christmas present ideas for someone who wants to try bronze casting

Presents that help someone get started, drawn from this page. They are ideas, not recommendations: we have not tested any of the products, so check sizes and details before you buy.

Kit to give

Some of these are affiliate links: if you buy or book through them we may earn a commission at no extra cost to you. Amazon links are searches, so compare what comes up.

More Christmas gift ideas for people who love doing things Stocking fillers

What happens on a course

The Getty describes the classic method. A wax model has wax rods attached, is encased in clay and the wax is melted out. The channels left by the rods carry the molten bronze in, and once it cools the clay is removed.

London Sculpture Workshop's six-day course, run over two weekends, shows how this works in a modern foundry. The first days cover making and finishing waxes and adding the gates, the channels for the metal. The waxes are then dipped in coatings to build up shells, with more dipping between the two weekends. On day four the shells are burnt out, the furnace is lit and the metal is poured. Day five is breaking out the moulds and fettling and chasing the bronze, which means cleaning up and refining the rough casting, and day six is patination and final finishing.

Not every course is lost wax. West Dean's three-day Introduction to bronze casting uses greensand moulds instead, modelling a relief in clay and casting it in sand, then fettling and patinating it.

Ways in and what they cost

WhereFormatCost (as last listed)
London Sculpture Workshop, London SE18Six days over two weekends, full lost-wax process from wax to patina; all levels£620 including 1 kg of bronze (March 2025)
West Dean College, West SussexLost-wax course with the pour on day four; beeswax, bronze and shell materials suppliedNot shown on the course page; check when booking
Craven College, Aireville CampusOne morning, 9am to noon; you make the wax and the piece is cast and returned in about 4 to 8 weeks£75 including materials (17 October 2026)
Peninsula School of Art, Fish Creek, WisconsinFive days, lost wax and ceramic shell; all levels$690 members, $745 non-members, plus materials that vary with the size and number of pieces (August 2025)
Chicago Avenue Fire Arts Center, MinneapolisFive Monday sessions casting small pieces in silver or bronze; minimum age 16$270 including $45 materials, with silver and up to half a pound of bronze (June 2026)

London Sculpture Workshop sells extra bronze during the course, and West Dean charges £25 a kilo for bronze beyond the half kilo included on its greensand course.

How to start

  1. Choose between a full course where you help with the pour and a shorter class where you make the wax and it comes back in bronze a few weeks later.
  2. Plan a small piece; West Dean's lost-wax course works at a hand-held scale.
  3. Get stout covered shoes and old clothes or an apron before the first day; London Sculpture Workshop prefers a boiler suit and steel toe-cap boots.

Where to go

We opened these links on 16 November 2026 and found them to be what we say. Dates, places and prices are on the official page, where they stay up to date.

Questions people ask

How long does it take to learn bronze casting?

You can make a finished piece on a short course. London Sculpture Workshop runs its full process over six days, and Peninsula School of Art over five.

How much does a bronze casting course cost?

As last listed, from £75 for a morning making a wax at Craven College to £620 for six days at London Sculpture Workshop. In the US, Peninsula School of Art listed $745 for non-members plus materials.

What is the lost-wax process?

You make a model in wax, encase it in a mould, melt the wax out and pour molten bronze into the space. The mould is then removed to reveal the metal.

What should I wear to a bronze casting course?

Follow your course's rules. West Dean asks for stout covered footwear and recommends safety boots, and London Sculpture Workshop prefers a boiler suit and steel toe-cap boots.

Where this comes from: J. Paul Getty Trust, Apollo from Pompeii, The Lost-Wax Casting Technique; ArtRabbit, Bronze Casting Course (14, 15, 16 and 21, 22, 23 March 2025), London Sculpture Workshop; West Dean College, Lost-wax casting in bronze with Abigail Burt; West Dean College, Introduction to bronze casting with Stephen Coles; Craven College, Wax to Bronze; Peninsula School of Art, Bronze Casting with John Hallett; Chicago Avenue Fire Arts Center, Small Things Casting with Lost Wax. Opened 16 November 2026.

Read next

More like this

All arts, crafts and music →

← All activities

The Second Start — our free email list

Our email is starting soon: one real story and one thing to try. Join now to get the first one. Free: the 7-Day Restart Plan (PDF) when you join.

Make this site yours

Three quick questions and we'll show you what fits: no beginner tips if you're already fit, no marathons if you're just starting. It stays in this browser, and you can change it any time.

How active are you at the moment?
Your age (optional)
What interests you? (pick any)